Special Message for Opening/Ending Ceremony
(Models not equipped with Navigation System)
1.
Select ''ON'' on the OPENING/ENDING CEREMONY display (page
2.
Push and hold the TRIP button. Push and hold the INFO button. Then push
the SETUP button.
SETUP button
3.
The display should now show ''STANDARD'' in the middle line.
4.
Use the TRIP button to select the ''SPL'' function.
The display should now show ''SPECIAL!'' in the middle line.
5.
Push the SETUP button to select the ''SET'' function.
The display should now show ''CHANGE OK?'' in the middle line.
6.
Push the SETUP button to select the ''YES'' function.
Multi Information Display
INFO button
SETUP button
TRIP button
TRIP button
Instruments & Controls
24
).
25