To Set Cruise Control; To Change The Set Speed - Honda 2009 GOLDWING GL1800 Owner's Manual

Riding with Cruise Control
RIGHT HANDLEBAR
CRUISE CONTROL master switch

To Set Cruise Control

1. Make sure you are in 4th gear or OD (5th gear), and that your speed is
between 30 and 100 mph (48 and 161 km/h).
Any speed above 100 mph (161 km/h) will be memorized as 100 mph (161
km/h).
2. Push the CRUISE CONTROL master switch. (The CRUISE ON indicator
will come on.)
3. Accelerate to the desired speed.
4. Push the SET/DECEL switch. (The CRUISE SET indicator will come on.)

To Change the Set Speed

To Fine Tune the Set Speed
To increase the set speed
To decrease the set speed
Each quick tap (brief push and release) on either switch will change your
speed by approximately 1 mph (1.6 km/h).
To Automatically Change the Set Speed
To increase the set speed
system will accelerate your motorcycle automatically. When you reach the
desired speed, release the switch.
To decrease speed
automatically slow your motorcycle. When you reach the desired speed,
release the switch.
94
Basic Operation & Riding
RESUME/ACCEL switch
SET/DECEL switch
tap the RESUME/ACCEL switch.
tap the SET/DECEL switch.
hold the RESUME/ACCEL switch in. The
hold the SEL/DECEL switch in. The system will
CRUISE ON
indicator
CRUISE SET
indicator