Opening/Ending Display - Honda NC750X Manual

Instruments

Opening/Ending display

NC750X
You can select the meter display when turning the ignition switch on or off from the STD mode
and SP mode.
If you select the SP mode, the letters you want to show can also be displayed while the
opening/ending display is shown.
To set the opening/ending display:
To set the opening/ending message:
NC750XA/XD
When the ignition switch is turned On or Off, the letters you want to show can also be
displayed while the opening/ending display is shown.
To set the opening/ending message:
34
(Continued)
(P.36)
(P.36)
(P.36)