Auxiliary Function
Input Jack Setup
The auxiliary input jack connector is located under the left fairing pocket. To
use it:
1.
Attach a cloth to the cover and remove the cover with care using a flat-tip
screwdriver.
2.
Open the left fairing pocket cover and remove the clips and grommet A.
3.
Lift out the fairing pocket.
cover
clips
4.
Remove the auxiliary input patch cord from the owner's manual pouch.
5.
Plug the auxiliary input patch cord into the wire harness connector.
130
Audio Systems
grommet A
wire harness connector
clips
fairing pocket
auxiliary input patch cord