Cisco 8961 Overview page 24

Overview of Configuring and Installing Cisco Unified IP Phones
The following topics provide an overview of procedures for adding Cisco Unified IP Phones to your
network:
•
•
Configuring Cisco Unified IP Phones in Cisco Unified Communications
Manager
To add phones to the Cisco Unified Communications Manager database, you can use:
•
•
•
•
For more information about these choices, see the
Communications Manager Database" section on page
For general information about configuring phones in Cisco Unified Communications Manager, refer to
the following documentation:
•
•
•
•
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 8.5 (SIP)
1-24
Configuring Cisco Unified IP Phones in Cisco Unified Communications Manager, page 1-24
Installing Cisco Unified IP Phones, page 1-28
Auto-registration
Cisco Unified Communications Manager Administration
Bulk Administration Tool (BAT)
BAT and the Tool for Auto-Registered Phones Support (TAPS)
Cisco Unified IP Phones, Cisco Unified Communications Manager System Guide
Cisco Unified IP Phone Configuration, Cisco Unified Communications Manager Administration
Guide.
Autoregistration Configuration, Cisco Unified Communications Manager Administration Guide.
Cisco Unified Communications Manager Bulk Administration Guide.
Chapter 1 An Overview of the Cisco Unified IP Phone
"Adding Phones to the Cisco Unified
2-9.
OL-20861-01