KitchenAid OUTDOOR GRILL Manual page 14

5. Attach the top of the side burner shelf to the grill firebox
by inserting three screws into the side burner shelf from
inside the grill firebox and tighten. See (A) below.
6. Attach the bottom of the side burner shelf to the side
panel of the grill by tightening the two screws inserted
in the keyhole slots in Step 3. See (B) below.
7. Attach the right side burner shelf to the control panel by
inserting the screw which was removed from step 3 and
tighten, see (C) below.
A
8. Attach side burner orifice brass connector to side
burner tube with preassembled brass screw then
tighten by wrench.
A
A. Side burner orifice brass connector
B. Side burner tube
14
9.
B
10. Insert the valve stem into the knob and push knob into
B
A
Connect side burner igniter wire to underside of side burner.
A
A. Side burner igniter wire from grill
B. Side burner ignition pin
place.
A. Control knob
B