Installation Instructions; Freestanding Outdoor Grill Installation - KitchenAid OUTDOOR GRILL Manual

Unpack Grill
1. Remove all packaging materials and remove grill from
the shipping base.
2. Move grill close to desired outdoor location.
3. Open the grill hood.
Remove Packaging Material Inside the Grill
1. Use a utility knife to cut straps and packing tape to
open box from top and remove the boxes.
2. Remove the warming shelf and grill grates from inside
the grill and remove the package inside the firebox.
3. Remove foam block and wrap from inside the grill.
4. Remove the cooking grids with hole.
5. Remove warming rack on brackets as
shown.

INSTALLATION INSTRUCTIONS

Freestanding Outdoor Grill Installation

Attach side burner assembly
1. Unpack the side burner assembly.
2. Loosen and remove 3 screws on left side burner.
3. Loosen but do not remove the 2 screws on the side panel
(A), remove the screw on the main control panel (B).
4. Align slots on the side shelf with the loosened screws.
Hook the side burner onto the two loosened screws and let
the shelf slide down so the screws are in the narrow neck
of the slots.
IMPORTANT: This step is meant to help with the
installation, but do not depend solely on the two
screws to hold the weight of the side shelf.
A
B
13