Mounting The Chimney - Electrolux EFC 650 Operating And Installation Manual

• Mount the chimney holder close to the ceilingwith the rawl plugs and the screws.
Warning! Be careful that it is centered over the hood and horizontally aligned.
• Hang the hood on the wall again.
• Secure it with the 2 lower screws.
Fitting for ducting
• Connect a tube between the hood air
outlet and the wall or roof exhaust
channel.
Fitting for recirculation
• Mount the recirculation spigot with the
4 screws supplied.

Mounting the chimney

• Connect the supply cord to the mains.
• Place the chimney and fix it to the top
chimney holder with the two screws
supplied.
• Lower the bottom part of the chimney
to the top of the hood.
Fig. 10
Chimney
holder
Fig. 9
Additional
hanging points
Chimney
fixing
points
Tube
Chimney
Air outlet
Lower
screws
41
Centre line
Hooks
Chimney holder
Recirculation
spigot
Supply cord
Fig. 11