Description Of The Cooker Hood - Electrolux EFC 650 Operating And Installation Manual

Description of the cooker hood

Functions
There are two possible systems:
• Extraction of air to the outside using an optional
venting kit and evacuation duct.
• Recirculation using an optional charcoal filter.
The air outlet must not be connected to
chimney flues or combustion gas ducts.
The air outlet must under no circumstances be
connected to ventilation ducts for rooms in
which fuel-burning appliances are installed.
Accessories
The following are included with the cooker hood:
• 1 hood canopy complete with controls, lighting
and fan motor.
• 1 telescopic chimney stack formed by: U-
shaped upper section and U-shaped lower
section.
• 1 recirculation spigot.
• 1 plastic bag containing: 2 wall hooks to fix the
canopy hood, 1 wall bracket to fix the chimney,
rawl plugs, screws, and documentation.
The following can be ordered from your retailer:
• Charcoal filter, PNC 942 120 892.
The carbon filter is to be used when the hood is
connected to the recirculation mode.
Extractor version
• The air is discharged to the outside through a
pipe, which must be fitted to connection flange
A. Fig. 1.
• In order to obtain the best performance the hose
should have a diameter equal to the outlet hole.
Filter Version
• The air is filtered through an charcoal filter and
returned to the kitchen through the top grill of
the outlet pipe.
• You will need an original ELECTROLUX PNC
942 120 892 charcoal filter for the filtering
function. (See Special Accessories).
• Fix the deflector using 4 screw Ø 2,9x13 mm.
Fig. 2.
Fig. 1
Fig. 2
35
A