Bios; Supported Acpi States - Dell PowerEdge M910 Technical Manual

9 BIOS

The PowerEdge M910 BIOS is based on the Dell BIOS core and supports the following features:

IA‐32 Intel Xeon 7510 chipset 4S

Simultaneous Multi‐Threading (SMT)

CPU Turbo Mode

PCI 2.3

Plug-and-play 1.0a

MP (Multiprocessor) 1.4

Boot from hard drive, optical drive, iSCSI drive, USB key and SD card

ACPI

Direct Media Interface (DMI)

PXE and WOL support for on‐board NICs

Memory mirroring and sparing

SETUP access through <F2> key at end of POST

USB 2.0 (USB boot code is 1.1 compliant)

F1/F2 error logging in CMOS

Virtual KVM, CD

UEFI (Unified Extensible Firmware Interface) 2.1 support
The PowerEdge M910 BIOS does not support the following:

Embedded Diagnostics

BIOS language localization

BIOS recovery after bad flash (but can be recovered from iDRAC6 Enterprise)

Supported ACPI states

The PowerEdge M910 supports the standard ACPI states. See acpi.info/for more information.
PowerEdge M910 Technical Guide 27