Adjustment Of Screen Position (Vertical - NEC PlasmaSync 42PD2 User Manual

Adjustment of Screen Position (Vertical)

Vertical (V) Adjustment Screen
1. Align the cursor with icon (3)
The cursor is moved left and right with the POSITION
CONTROL / buttons.
V-HEIGHT: Vertical enlargement ratio adjustment
(Displayed only with Multiple Screens)
Adjustment is possible only in multi mode.
V-POSITION 2 cannot be adjusted at the time of
VIDEO input.
Vertical (V) adjustment screen
Icon (3)
V-POSITION 1
V-POSITION 2
V-HEIGHT
2. Align the cursor with the desired item
The cursor is moved up and down with the POSITION
CONTROL / buttons.
V-POSITION 1: Vertical position 1
Used to align the raster on the PDP.
V-POSITION 2: Vertical position 2
Only needs to be adjusted when V-Position 1 does not
allow the complete image to fill the screen.
(Adjustment is not required with a standard signal.)
V-HEIGHT: Vertical enlargement ratio adjustment (Dis-
played only with Multiple Screens)
Adjustment is possible only in multi mode.
V-POSITION 2 cannot be adjusted at the time of
VIDEO input.
V-POSITION 1
V-POSITION 2
V-HEIGHT
3. While watching the screen, press the
and adjust
POSITION / CONTROL
MOVE DOWN
4. Return to the main menu
* To reset the adjustment value, press the RASTER
NORMAL button before pressing the EXIT button.
* To delete the main menu, press the EXIT button once
more.
POSITION 1,2 and V-POSITION 1,2 are not avail-
*
able at the time of RGB input when AUTO PIC-
TURE is turned on.
To adjust H-POSITION 1,2 and V-POSITION 1,2 at
the time of RGB input, turn off AUTO PICTURE.
Horizontal and Vertical Position Controls
*
Both the horizontal and vertical position controls in
the OSM include a POSITION 1 and a POSITION 2
adjustment when an RGB signal is selected for
display. These two position controls provide access
to the entire raster position (POSITION 1) and a fine
adjustment within the raster (POSITION 2). First
adjust POSITION 1 so that the raster fills the entire
screen. After the raster position is set properly, then
select POSITION 2 to make sure that the image fills
the raster and all of the image is filling the screen.
NOTE: Make sure that none of the actual image is
missing, left to right or top to bottom.
E-29
/ buttons
MOVE UP
EXIT