Table of Contents
Advertisement
Operating Range
* Use the remote controller within a distance of about 7 m
/ 23ft. from the front of the monitor's remote control sen-
sor and at a horizontal angle of within 30 .
* The remote control operation may not function if the
monitor's remote control sensor is exposed to direct sun-
light or strong artificial light, or if there is an obstacle
between the sensor and the remote control unit.
Using the wired remote control mode
Connect the included remote control cable to the remote
control's remote jack and "REMOTE IN" jack on the
monitor.
When the cable is connected, the mode automatically
switches to wired remote control.
When the wired remote control mode is used, the remote
control unit can be operated even if no batteries are loaded.
Note:
When you connect a remote control cable to this moni-
tor , attach the supplied ferrite core. If you do not do
this, this monitor will not conform to mandatory FCC
standards. (42PD2 only)
Note:
Do not connect the wired remote control to the REMOTE
THROUGH OUT jack. If doing so, the remote control
does not work.
Remote Control Cable
To Remote Jack
POWER OFF
POWER ON
RGB 2
RGB 1
RGB 3
VIDEO
POSITION / CONTR OL
EXIT
PROCEED
RGB/VIDEO
CONTRAST
BRIGHT
VIDEO
COLOR
TINT
SHARPNESS
VISUAL
RASTER
NORMAL
NORMAL
ID SELECT
CLEAR
E-14
Approx.
7m/23ft
30˚
30˚
POWER OFF
POWER ON
RGB 2
RGB 1
RGB 3
VIDEO
POSITION / CONTR OL
EXIT
PROCEED
RGB/VIDEO
CONTRAST
BRIGHT
VIDEO
COLOR
TINT
SHARPNESS
VISUAL
RASTER
NORMAL
NORMAL
ID SELECT
CLEAR
Advertisement
Table of Contents
