Table of Contents
Advertisement
DMX Channel Modes, Assignments, and Values
Channel
4-Channel
Channel
2-Channel
Channel
1-Channel
Configuration
(Standalone)
Automatic Mode
DMX-4 User Manual (Rev. 2)
Function
1
Dimmer
2
Dimmer
3
Dimmer
4
Dimmer
Function
1
Dimmer
2
Dimmer
Function
1
Dimmer
Set the product in the standalone Automatic mode to control without a DMX controller.
1.
Connect the product to a suitable power outlet.
2.
Turn the product on.
Never connect a product that is operating in Standalone mode to a DMX string
connected to a DMX controller. Products in Standalone mode may transmit DMX
signals that could interfere with the DMX signals from the controller.
To enable the Automatic mode, follow the instructions below:
1.
Press <MODE> to switch between DMX mode and Standalone mode. Switch it to
Standalone mode.
2.
Press <MENU> repeatedly until P:01–P:16 shows on the display.
3.
Use <> or <> to select the desired Automatic program.
4.
Press <MENU> repeatedly until SP:01–SP:99 shows on the display.
5.
Use <> or <> to select the desired running speed.
6.
Press <MENU> repeatedly until d000–d100 shows on the display.
7.
Use <> or <> to select the desired dimmer level for the program currently
running.
NOTE: There is no dimmer function if you select d000.
Value
Setting
000 255 0–100%
000 255 0–100%
000 255 0–100%
000 255 0–100%
Value
Setting
000 255 Channels 1 + 2, 0–100%
000 255 Channels 3 + 4, 0–100%
Value
Setting
000 255 All four channels, 0–100%
Page 11 of 14
Advertisement
Table of Contents
