EFORE EGIN What is included 1 x Stage Dimmer™ 12 (TFX-D12) Manual Warranty Card Unpacking Instructions Immediately upon receiving a fixture, carefully unpack the carton, check the contents to ensure that all parts are present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if any parts appear damaged from shipping or the carton itself shows signs of mishandling.
Standard 19” EIA rack mountable Module air intake I/O Panel Knockout rear cover panel BUTTON MENU DOWN TFX-D12 User Manual MENU Button Modular dimmer module FUNCTION Access the set-up and menu functions Scroll menu functions or increase values Scroll menu functions or decrease values...
NSTALLATION Mounting The TFX-D12 dimmer packs are designed to be mounted in a standard 19” EIA rack using the two mounting holes on each flange/(ears). The two mounting flanges are designed for securing the dimmer pack to the front rack mounting rails. It is highly recommended that you add support to the rear of the dimmer pack, especially in touring or road case environments.
1 2 3 4 5 6 7 8 9 A B C Menu Navigation 1 2 3 4 5 6 7 8 9 A B C TFX-D12 User Manual First line displays dimming levels of each channel. Second line displays the channel.
Select a chasing speed from 0.1 to 20 seconds using the UP/DOWN button. (Hold the UP/DOWN buttons for two seconds to change speed quickly.) Press the ESC button to confirm setting. TFX-D12 User Manual Operating Instructions Dmx fail Dmx fail Prog08...
In [Chan], press UP/DOWN buttons to select channels 1~12. In [001], press UP/DOWN buttons to select dmx start address [001-512]. Press the ESC button to exit and confirm. TFX-D12 User Manual Pha corr (Yes) or (No) Dmx addr (Block) or (Single)
[Curve]. Press the MENU button to enter the sub- menu. Press UP/DOWN buttons to select from Linear, Switch & Square dimmer curve. Press ESC button to exit and confirm. TFX-D12 User Manual Preheat [005%] Chan [1] [050%] Curve...
In [Chan], press UP/DOWN buttons to select channels 1~12. In [001], press UP/DOWN buttons to select percentage [000%-1*0%]. Press the ESC button to exit and confirm. TFX-D12 User Manual Preset [000%] Chan [1] [030%] Operating Instructions...
XLR male to female connectors. The shield connection is pin 1, while pin 2 is Data Negative (S-) and pin 3 is Data positive (S+). CHAUVET carries 3-pin XLR DMX compliant cables, DMX-10 (33’), DMX-4.5 (15’) and DMX-1.5 (5’)
Package must be clearly labeled with a Return Merchandise Authorization Number (RA #). Products returned without an RA # will be refused. Call CHAUVET and request RA # prior to shipping the fixture. Be prepared to provide the model number, serial number and a brief description of the cause for the return.
Need help?
Do you have a question about the TFX-D12 and is the answer not in the manual?
Questions and answers