Table of Contents
Advertisement
Setup Menu
Action
1)
Press the MENU button to enter the setup
menu.
2)
There are 6 menu items to choose from;
Dmx fail, Phase Correction, Dmx addr,
Preheat, Curve and Preset.
3)
Press the UP and DOWN buttons to scroll
menu items.
4)
Press ESC to exit the setup menu.
DMX Fail [Dmx fail]
The DMX Fail feature allows the user to select how the dimmer will behave if you were to loose the
DMX controller's signal to the dimmer.
Action
1)
Press the MENU button to enter the setup
menu.
2)
Press the UP and DOWN buttons to scroll
menu items until you reach [Dmx fail].
3)
Press MENU to enter the sub-menu.
4)
If it were running the built-in scene 08 it
would display as per the illustration on the
right.
5)
Press the UP/DOWN buttons to select one
of the following; [Hold], [Analog],
[Prog.01-12].
HOLD , ANALOG
1)
Whether you choose Hold or Analog press
PROG .01- 12
1)
Press the ESC button to confirm.
2)
Select a chasing speed from 0.1 to 20
seconds using the UP/DOWN button.
(Hold the UP/DOWN buttons for two seconds to change
speed quickly.)
3)
Press the ESC button to confirm setting.
TFX-D12 User Manual
the ESC button to confirm and exit.
Dmx fail
Dmx fail
Prog08
Dmx fail
(Hold) or (Analog)
Speed
00.3s
9
Operating Instructions
Hold – The dimmer
will hold the last dmx
signal received.
Analog – The
dimmer will revert to
the Analog input
signal.
ProgXX - Will start
internal programs 1-
12.
2004-11-11/11:32
Advertisement
Table of Contents
