Alternate Rigging
Mounting Diagram
(Alternate
Configuration)
DMX-4 User Manual (Rev. 2)
If you are using this product with truss or a lighting stand, there is an alternate rigging
configuration available. This option is ideal for hanging the product without using a
mounting clamp.
1.
Unplug the product from power.
2.
On the back of the product, locate the six Phillips-head screws.
3.
Use a Phillips-head screwdriver to remove these screws.
4.
The mounting bracket will now come off. Be careful not to damage the internal
components of the dimmer, as they are exposed during this step!
5.
Flip the mounting bracket (back panel) around.
6.
Reattach the panel by securely reinstalling the six Phillips-head screws.
Back Panel
Remove these
six screws
Alternate Rigging
Configuration
Page 9 of 14