Table of Contents
Advertisement
Item
1
2
3
4
Mask
Brightness
Contrast
Saturation
Hue
Name
Volume
NOTE!
Network LIVE videos are unable to be switched off when applying Mask function. To avoid network LIVE
videos, please use User permission mask playback features (Administrator has no such permissions).
5.6 Account Setup
The Account Setup menu is used to provide role-based permission independently for
each user (maximum of 4 users) to access the DVR over network. The default admin
account is [admin] and password is "123456".
Item
Auto Lock
No.
Password
Permissions
Change Admin Password
You can setup independently for each channel.
Check the box to Enable/ Disable mask function for LIVE mode
Drag the white bar or press ◀ ▶ to adjust Brightness of your camera from
value 1 to 255. The default value is 128.
Drag the white bar or press ◀ ▶ to adjust Contrast of your camera from
value 1 to 255. The default value is 128.
Drag the white bar or press ◀ ▶ to adjust Saturation of your camera from
value 1 to 255. The default value is 128.
Drag the white bar or press ◀ ▶ to adjust Hue of your camera from value 1 to
255. The default value is 128. (This function is ineffective in PAL system).
Set up name of each channel.
Select to adjust audio volume for CH1 to CH 4 under LIVE mode and
recording mode.
After one minute without any action, the DVR will switch to LIVE mode
automatically. Auto lock can function differently according to the setting below.
Function
Setting
Key lock
Key unlock
Disable
Check to activate the user's account.
Enter to set up password for each user. Password must be at least 8
characters, including letters and numbers. Resetting Administrator
password must also be at least 8 digits.
Enter to setup Permissions for each user.
Enter to change administrator's password.
23
Description
Description
Auto Logout
○
○
×
Key Lock
○
×
×
Advertisement
Table of Contents
