Planet ICA-3550V User Manual page 39

This IP camera supports UPnP. If this service is enabled on your computer, the
camera will automatically be detected and a new icon will be added to "My
Network Places."
UPnP
When the camera is installed under a router, Enable UPnP Port Forwarding to
UPnP Port let the router open ports so that the video streams can be sent out from a LAN.
Forwarding Set Web Port, Http Port, and RTSP port, and make sure your router supports
UPnP and the function has been activated.
RTSP Server enable or disable RTSP server
"Disable" means everyone who knows your camera IP Address can link to
your camera via RTSP. No username and password are required.
Under "Basic" and "Digest" authentication mode, the camera asks the user to
RTSP
give username and password before allows accessing. The password is
Authentication
transmitted as clear text under basic mode, which provides a lower level of
security than under digest mode.
Make sure your media player supports the authentication schemes
RTSP Port: setup port for RTSP transmitting (Default: 554)
RTSP Start and End Port: in RTSP mode, you may use TCP and UDP for
RTSP port
connecting. TCP connection uses RTSP Port (554). UDP connection uses RTSP
Start and End Port.
Multicast is a bandwidth conservation technology. This function allows
several users to share the same packet sent from IP camera. To use
Multicast, appoint IP Address and port here. TTL means the life time of
Multicast Setting
(Based on the
packet, The larger the value is, and the more users can receive the packet.
RTSP Server)
<<< Warning >>>
RTP via RTSP" in your media player. Then key in the RTSP path of your
camera: "rtsp://(IP address)/" to receive the multicast.
The IP camera supports ONVIF v1.01 / v2.20 standard for integration.
Under ONVIF connection, the video will be transmitted by RTSP. Be sure to
ONVIF
enable the RTSP server in IP setting, or you're not able to receive the video via
ONVIF.
When the function is enabled, the camera checks once in a while if the user who
RTSP Keepalive links to the camera via ONVIF still keeps connecting. If the connection is broken,
the camera will stop transmitting video to user.
This function enables MAC systems to link to this IP camera. Key in the name
here.
Bonjour
The web browser "Safari" also has Bonjour function. Tick "Include Bonjour" in
the bookmark setting, and you can see the IP camera appearing under the
bonjour category. Click the icon to connect the IP camera.
If your PC supports LLTD, enable this function and then you can check the
connection status, properties, and device position (like IP address) of this IP
LLTD
Camera in the network map.
In the computer running Windows Vista or Windows 7, you can find LLTD
5 Mega-pixel Outdoor IR PoE IP Camera
UPnP must be enabled on your computer.
To use Multicast, be sure to enable the function "Force Multicast
39
User's Manual of ICA-3550V