Tape Operation; Inserting A Tape; Ejecting A Tape; Fast Winding - Blaupunkt MONTREUX RCR 44 Operating Instructions Manual

Tape operation

Inserting a tape

• Turn the set on.
• Insert a tape.
Insert tape with side A or 1
Eject tape
facing up, the open side facing
to the right
The tape will be played in the direction used
last.
If "TR1-PLAY" is displayed, this means that
track 1 or A of the tape is played.

Ejecting a tape

• Press .
The tape will be ejected.
24

Fast winding

Fast forward

• Press FF (fast forward).
At the end of the tape, the set will
switch to the other track and start play-
ing it.
Stop fast forward
• Press FR.

Fast rewind

• Press FR (fast rewind).
When the tape has rewound to the be-
ginning, the set will play the same track
again.
Stop fast rewind
• Press FF.
Changing the track
Press simultaneously
TR1-PLAY or TR2-PLAY in the display
Fast rewind Fast forward
To stop: To stop:
press FF press FR

Autoreverse

• Press FR and FF at the same time.
At the end of the tape, the unit will automati-
cally switch to the other track. The display will
show "TR1-PLAY" for track 1 or A and "TR2-
PLAY" for track 2 or B.
Note:
If there is too much tension on the tape during
playback, the set may switch to the other
track by itself. In this case you should check
the tape. Sometimes it is helpful to rewind the
tape completely.