Tape operation
Inserting a tape
•
Turn on the set.
•
Insert a tape.
Insert the tape with side A or 1 showing up, the
open side facing to the right.
= Press to eject the tape.
The tape will be played in the direction used
last.
"TR1-PLAY" in the display means that track
1 or A is being played.
Removing a tape
•
Press
.
The cassette will eject.
24
Fast Forward/Rewind
Fast Forward
•
Press FF.
At the end of a tape side, the mecha-
nism changes directions automatically
to play the other side.
Stopping Fast Forward operation
•
Press FR.
Fast Rewind
•
Press FR.
At the beginning of the tape, the me-
chanism will automatically start play-
back.
Stopping Fast Rewind operation
•
Press FF.
Fast winding
FR : Fast rewind; stop by pressing FF.
FF : Fast forward; stop by pressing FR.
To switch to the other side of the
cassette tape:
Press both buttons simultaneously.
The display shows "TR1-PLAY" or
"TR2-PLAY".
Changing the tape direction
To change the tape direction during cassette
playback,
•
press FR and FF simultaneously.
At the end of a tape side, the mechanism
changes directions automatically to play the
other side (Autoreverse). The display shows
"TR1-PLAY" for track (side) 1 or A or "TR2-
PLAY" for track 2 or B.
Notice:
If there is too much tension on the tape during
playback, the set may switch over by itself
before having reached the end of the tape
side. In this case check the condition of the
cassette tape. Sometimes it helps to rewind
it completely.