Automatic Seek Tuning Start; Adjusting The Volume For Traffic Messages And Warning Beep; Tape Operation; Inserting A Tape - Blaupunkt MADEIRA RCR 85 Operating Instructions Manual

Automatic seek tuning start

(During cassette operation)
If you leave the reception area of your traffic
program station while you are playing a cas-
sette, the car radio will automatically tune
into another traffic program station.
If no traffic program station is found within
approximately 30 seconds, the tape will be
stopped and you will hear a warning beep.
To switch the warning beep off, proceed as
detailed above.
Adjusting the volume for traffic
messages and warning beep
A default value is set ex factory for the volu-
me of traffic announcements and the warning
beep. You can change this default setting
with the DSC function (see "DSC programm-
ing, ARI (TA)").

Tape operation

Inserting a tape

• Turn on the set.
• Insert a tape.
Eject tape Insert tape with side A or 1
facing up, the open side facing
to the right
The tape will be played in the direction used
last.
If "TR1-PLAY" is displayed, this means that
track 1 or A of the tape is played.

Ejecting a tape

• Press .
The cassette will be ejected.

Fast winding

Fast forward
• Press FF (fast forward).
At the end of the tape, the set will
switch to the other track and start play-
ing it.
To stop fast forward:
• press FR.
Fast rewind
• Press FR (fast rewind).
When the tape has been completely
rewound, the set will start playing the
same track again.
To stop fast rewind:
• press FF.
Changing the track
Press simultaneously
TR1-PLAY or TR2-PLAY in the display
Fast rewind Fast forward
To stop: To stop:
press FF press FR
25