Sampling Stored Stations Briefly With Preset Scan; Sampling Stations Briefly With Radio Scan; Tape Operation; Inserting A Tape - Blaupunkt MEMPHIS DJ Operating Instructions Manual

Sampling stored stations briefly
with Preset Scan
You can briefly sample all preset stations of
a memory bank using the Preset Scan functi-
on.
On FM, you can let the system sample the
stations stored on the Travelstore level or on
the three other memory banks.
• Select a waveband.
• On FM, press the FM•T button to
choose the desired memory bank.
To start Preset Scan:
• Press PS.
To continue listening to a sampled stati-
on/switch Preset Scan off:
• Press PS once again.
24
Sampling stations briefly
with Radio Scan
This function allows you to sample all stati-
ons of the adjusted waveband for approxima-
tely 8 seconds each.
To activate Scan:
press knob 1 for approximately 1 se-
•
cond.
The next station received will be briefly
sampled. The frequency of that station
flashes on the display. Following this,
the next station is searched for. This
procedure is repeated until the entire
frequency band has been scanned.
To continue listening to a sampled stati-
on/switch Radio Scan off:
briefly press knob 1.
•
If no station is selected during the search
operation, the scan function will be automa-
tically switched off after the entire frequency
band has been passed through. The radio
will then return to the initial station that was
being played when the scan function was
activated.

Tape operation

Inserting a tape

• Turn on the set.
• Insert a tape.
Eject tape Insert tape with side A or 1
facing up, the open side facing
to the right
The tape will be played in the direction used
last.
If TR1-PLAY is displayed, this means that
track 1 or A of the tape is played.

Ejecting a tape

• Press .
The cassette will be ejected.