Table of Contents
Advertisement
Pre-Delivery Service
Defects in the mechanical, electrical, sheet metal,
paint, trim, and other components of your vehicle
may occur at the factory or while it is being
transported to the dealer facility. Normally, any
defects occurring during assembly are identified
and corrected at the factory during the inspection
process. In addition, dealers inspect each vehicle
before delivery. They repair any uncorrected factory
defects and any transit damage detected before the
vehicle is delivered to you.
Any defects still present at the time the vehicle is
delivered to you are covered by the warranty.
If you find any defects, advise your dealer without
delay. For further details concerning any repairs
which the dealer may have made prior to you
taking delivery of your vehicle, ask your dealer.
Production Changes
GM and GM dealers reserve the right to make
changes in vehicles built and/or sold by them at
any time without incurring any obligation to
make the same or similar changes on vehicles
previously built and/or sold by them.
Noise Emissions Warranty for
Light Duty Trucks Over
10,000 LBS GVWR Only
GM warrants to the first person who purchases
this vehicle for purposes other than resale and to
each subsequent purchaser of this vehicle, as
manufactured by GM, that this vehicle was
designed, built, and equipped to conform at the
time it left GM's control with all applicable
United States EPA Noise Control Regulations.
This warranty covers this vehicle as designed, built,
and equipped with GM, and is not limited to any
particular part, component, or system of the vehicle
manufactured by GM. Defects in design, assembly,
or in any part, component, or vehicle system as
manufactured by GM, which, at the time it left GM's
control, caused noise emissions to exceed Federal
Standards, are covered by this warranty for the life
of the vehicle.
17
Advertisement
Table of Contents
