Residual Heat Indicator - AEG C91900KFE-N Installation And Operating Instructions Manual

Ceramic glass hob
Table of Contents

Advertisement

Cooking with the Automatic Warm up Function
All four of the hob's cooking zones can be controlled in nine stages and
have an automatic warm up function:
– 1, lowest heat setting
– 9, highest heat setting
– a, automatic warm up function
When you select the required heat setting using the + sensor field, the
cooking zone will work for a specific time on full power and then
switch automatically to the set heat setting.
The duration of the automatic warm up function depends on the heat
setting selected.
Select the required cooking zone with the cooking zone sensor fields.
Touch sensor field + until it reaches the required heat 1 to 8. The set
heat setting will be displayed first. After five seconds a (= automatic
warm up function) will replace the heat setting in the display. At the
end of the warm up time the heat setting will be shown again.
3
If during the automatic warm up function you select a higher setting,
eg. from 3 to 5, the warm up time is adjusted to match. If you select a
lower setting, the warm up time ends at once.
54

Advertisement

Table of Contents
loading

This manual is also suitable for:

C91900kfe

Table of Contents