Table of Contents
Advertisement
SETUP – BASIC SETTINGS
Setting the dynamic range
control (DRC)
You can use DRC to set the dynamics
of a Dolby programme in steps from
"OFF" to "Full". Select the "Full" setting
for full dynamics.
Open the setup menu.
Use the
the "AUDIO SETUP" menu item.
Confirm your choice by pressing
the ENTER/PLAY button B.
Use the
the "COMPRESSION" menu item.
button <.
Press the
Use the
the setting that you want.
Confirm your choice by pressing
the ENTER/PLAY button B.
Close the setup menu by pressing
the SETUP button D.
The settings are saved and the setup
menu closes.
52
< buttons to select
buttons < to select
buttons < to select
Pro Logic setting
If you are watching/listening to a DVD
containing an audio track in Dolby Sur-
round Pro Logic, you can activate Pro
Logic in order to obtain a surround-
sound signal at the digital output. The
Pro Logic decoder in the ME2 will then
compute a surround-sound signal that
comes close to the Dolby 5.1 listening
experience.
You can choose between the settings:
"ON", "OFF" and "AUTO". If the "AUTO"
setting is selected and a Dolby Surround
Pro Logic track is present on the disc,
the device will always use the Pro Log-
ic decoder to output a signal at the dig-
ital output.
You can find the Pro Logic settings in
"AUDIO SETUP" under "PRO LOGIC".
Downmixing Dolby Digital DVDs
If your amplifier system does not have
a digital input, you can simply connect
the ME2 to two free inputs. The ME2's
downmix function computes a compat-
ible stereo signal from the Dolby Digital
signal.
You can find the downmix settings un-
der "SPEAKER SETUP" in the setup
menu.
Configuring PCM
You can make the ME2 output a linear
PCM signal (LPCM) with a sampling
rate of 48K or 96K.
Only change this setting if the system
in your vehicle only works with 48K PCM
signals. You can find the PCM settings
in "AUDIO SETUP" under "LPCM OUT-
PUT".
Hide quick links:
Advertisement
Table of Contents
