ProForm 615 T Treadmill User Manual page 12

10. With the help of a second person, hold the con-
sole assembly near the Right Upright (85).
Connect the Upright Wire (87) to the console
wire. See the inset drawing. The connectors
should slide together easily and snap into
place. If they do not, turn one connector and try
again. IF YOU DO NOT CONNECT THE CON-
NECTORS PROPERLY, THE CONSOLE MAY
BECOME DAMAGED WHEN YOU TURN ON
THE POWER. Then, remove the wire tie from
the Upright Wire.
11. Set the console assembly on the Handrails (80).
Be careful not to pinch any wires. Insert the
excess Upright Wire (87) into the Right
Upright (85).
Attach the console assembly with the four 1/4" x
1/2" Screws (9) removed in step 9 and four 1/4"
Star Washers (12). Start all four Screws, and
then tighten them.
10
Console
Assembly
Console
Wire
87
85
11
80
87
12
9
85
12
Wire
Tie
87
9
Console
Assembly
80
12