Table of Contents
Advertisement
18. See the upper drawing. Plug the Power
Adapter (60) into the receptacle inside the bat-
tery compartment on the Console (5).
Note: To plug the Power Adapter (60) into an
outlet, see HOW TO PLUG IN THE POWER
ADAPTER on page 16.
See the lower drawing. The Console (5) can
also be operated with four D batteries (not
included); alkaline batteries are recommended.
Do not use old and new batteries together or
alkaline, standard, and rechargeable batteries
together.
Remove the screws, remove the battery cov-
ers from the back of the Console (5), and insert
batteries into the battery compartments. Make
sure to orient the batteries as shown by the
diagrams inside the battery compartments.
Then, reattach the battery covers.
19. Make sure that all parts of the elliptical are properly tightened. Note: Some hardware may be left over
after assembly is completed. To protect the floor or carpet from damage, place a mat under the elliptical.
18
60
Battery
Cover
5
15
Receptacle
5
Battery
Cover
Receptacle
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the 600 Le Elliptical and is the answer not in the manual?
Questions and answers