Pro-Form 600 Le Elliptical Manual page 11

9. Insert the Pulse Wires (118) upward through the
Upright (3) as shown.
10. While a second person holds the Console (5)
near the Upright (3), connect the wires on the
Console to the Upper Wire Harness (48) and to
the Pulse Wires (118).
Insert the excess wire into the Upright (3).
Tip: Avoid pinching the wires. Attach the
Console (5) to the Upright (3) with four M4 x
16mm Round Head Screws (101).
11. Attach the Upright Cap (4) to the Console (5)
with two M4 x 16mm Round Head Screws (101).
9
118
10
118
3
101
11
4
101
11
3
118
5
48
Avoid pinching
the wires
5