Assembly - Gold's Gym GGEX61707.0 User Manual

ASSEMBLY

To hire an authorized service technician to assemble the exercise cycle, call 1-800-445-2480.
Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the pack-
ing materials. Do not dispose of the packing materials until assembly is completed. In addition to the included
tools, assembly requires your own Phillips screwdriver
wrench .
As you assemble the exercise cycle, use the drawings below to identify small parts. The number in parentheses
below each drawing is the key number of the part, from the PART LIST near the end of this manual. The second
number is the quantity needed for assembly. Note: Some small parts may have been pre-assembled. If a
part is not in the parts bag, check to see if it has been pre-assembled.
M6 Washer
(55)–8
M4 x 16mm
Screw (57)–4
M8 x 25mm Button
Screw (33)–3
M8 Split
Washer (59)–5
M4 x 22mm
Screw (52)–2
M10 x 75mm Carriage Bolt (51)–4
and an adjustable
M8 Nylon
Locknut (60)–4
M6 x 38mm Button
Screw (48)–4
M8 x 70mm Button
Bolt (54)–2
5
M10 Nylon
Locknut (63)–4
M6 x 42mm Button
Screw (49)–4