Adjusting The Display Angle; Rotating The Display (Optional); To Install The Pivot Software - BenQ FP91R User Manual

R series-professional lcd monitor

Hide thumbs Also See for FP91R:

Table of Contents

Adjusting the display angle

You may position the screen to the desired angle with -5° to +20° monitor tilt and 105 mm

monitor height.

Your LCD monitor also supports portrait viewing orientation, allowing you to fit your specific

desktop application without needing to scroll down.

Before rotating the display with a portrait viewing orientation, please install the Pivot software

from the attached CD first.

If your garphics card supports display rotation, you will not need to install the Pivot software and may

skip this section, for the installation may cause a conflict with this type of graphics cards.

1. Execute START_PIVOT.EXE from the folder named Pivot on the attached CD.

2. Follow the on-screen instructions to install the software.

3. After restarting your system, you will see a Pivot Software Control icon,

system tray. Click on the icon and choose Rotate 90 degrees,

this action, choose Rotate 0 degree,

4. Turn the power off and keep following the steps below.

, displaying in the

, to pivot the display. To cancel

Assembling your monitor hardware

Table of Contents