Setting Or Changing The Start Delay - AEG FAVORIT 84470 VI User Information

Setting or changing the start delay

Using the start delay timer you can adjust when within the next 19
hours the programme is to begin.
Setting the start delay:
1. Open the door of the dishwasher.
2. Press the ON/OFF button.
The LED indicators for all the buttons in the control panel that are
now able to be selected will become illuminated.
3. Continue pressing the
the programme is to start is flashing in the multi-display.
4. Press the button for the desired programme.
The length of the selected programme will flash for a moment in the
multi-display, and then the selected starting time will be displayed
again.
5. Close the door.
The programme will start automatically following a countdown
of the hours set.
Changing the start delay:
As long as the programme has not started, you are still able
to change the start delay by pressing the
Cancelling the time delay:
As long as the programme has not started, you are still able
to cancel the start delay. Continue pressing the
the length of the selected cycle appears in the multi-display.
The selected programme will begin immediately after the
dishwasher door as been closed.
Changing the programme after the start delay has been set:
As long as the programme has not started, you are still able
to change the cycle set by pressing a cycle button.
1. Press the button for the new programme and hold it down.
First, the indicator for the programme that has just been selected
will flash.
After several seconds only the indicator for the new programme
will be flashing.
2. Release the cycle button.
3. Close the door.
The programme will start automatically following a countdown
of the hours set.
button until the number of hours until
Operating instructions
button.
button until
21