Installing The Dishwasher - AEG FAVORIT 84470 VI User Information

Installing the dishwasher

• The dishwasher must be installed on a firm floor and adjusted to
ensure that it is stable and level.
• To compensate for unevenness in the floor and to match the height
of the appliance to that of surrounding units, extend the threaded
feet using a screwdriver:
• Adjust the rear feet of the appliance using a cordless screwdriver
from the front of the appliance.
• The drain hose, inlet hose and mains cable must be laid so that they
are able to move freely within the plinth area and so that they are
not kinked or crushed.
• The dishwasher must also be screwed tightly to the work surface or
to the adjoining units. This is essential to ensure the dishwasher does
not tip up.
Dishwashers that can be integrated
(see installation template supplied)
Installation and connection instructions
31