Starting A Programme - AEG FAVORIT 84470 VI User Information

Aeg dishwasher
Hide thumbs Also See for FAVORIT 84470 VI:
Table of Contents

Advertisement

Operating instructions

Starting a programme

1. Check that the dishes and cutlery are stacked in the dishwasher in
such a way that the spray arms are free to rotate.
2. Turn on the tap fully.
3. Press the ON/OFF button.
The LED indicators for all the buttons in the control panel that are
now able to be selected will become illuminated.
4. Press the relevant button for the cycle required (see "Programme
Table"). The cycle display will become illuminated.
The remaining time for the cycle will be shown in the multi-display.
The remaining time for the cycle is adjusted according to amount of
dishes, degree of soiling, etc.
5. Close the dishwasher door. The programme will begin.
A point-shaped optical signal appears on the floor beneath the
appliance's door. The punctiform light signal is not dangerous as it is
not a laser light.
If the appliance has been installed higher up with a forniture door
mounted flush, the optical signal will no longer be visible.
If an error message is displayed in the multi-display and/or if an
acoustic error message can be heard after the cycle has begun, please
read the section "What to do when...".
Interrupting or cancelling a programme
Only interrupt a programme that is in progress if it is absolutely
necessary. After the appliance has been closed again, the air that
has entered will be heated significantly and expand.
As a result, water may collect in the base of the appliance and
trigger the antiflood system.
Interrupting the wash programme by opening the dishwasher door
Hot steam may escape when the door is opened. There is a risk of
scalding.
1. Open the door carefully. The programme will stop.
2. Close the door. The programme will continue.
Cancelling the programme
1. Open the door of the dishwasher.
2. Press function buttons 2 and 3 for approx. 2 seconds and keep them
pressed. The LED indicators for all the buttons in the control panel
that are now able to be selected will become illuminated.
3. Release the function buttons. The programme has been cancelled.
4. Switch off the dishwasher by pressing the ON/OFF button.
20

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents