Pause Function; Setting Or Changing The Delay Start Timer - AEG ÖKO FAVORIT 40660 i User Instructions

Operating Instructions

Pause function

The pause function can only be initiated before the drying section of
3
the programme I. If the pause function is initiated during the drying
section of the programme I the wash programme is ended.
Using the pause function the dishwasher can be temporarily stopped:
0 1. Press the ON/OFF button. The wash programme will stop.
2. All indicators will go out.
3. After a short time when the wash programme is to continue, press the
ON/OFF button again. The wash programme will continue.
The wash programme should not be stopped for a prolonged period or
2
the cooled water will need to be reheated resulting in increased energy
consumption.

Setting or changing the delay start timer

Using the delay start timer you can opt to set the wash programme to
start in 3, 6 or 9 hours.
0 1. Press the button
2. Setting the delay start timer:
Press the button
delay illuminates.
Changing the delay start timer:
As long as the wash programme has not started, you can still change
the delay start set by pressing the button
b
ton
programme will begin immediately.
3. Press the button for the required wash programme. The programme
indicator lights up.
4. After the set number of hours the wash programme will begin.
26
M
.
b
until the indicator next to the number of hours of
until all three of the time indicators are off. The selected wash
b
. Repeatedly press the but-