Notes for Test Institutes
Testing in accordance with EN 60704 must be carried out with the
appliance fully loaded and using the test cycle (see "Programme
Table").
Tests in accordance with EN 50242 must be carried out when the salt
dispenser in the water softener and the rinse aid dispenser have been
filled with salt and rinse aid respectively, and using the test
programme (see"Programme Table").
Full load:
Rinse aid setting:
Amount of detergent required:
Arrangement upper
basket: without smaller
bowl and salad-bowl
Cup racks: position A
Arrangement upper
basket: with smaller bowl
and salad-bowl
Arrangement cutlery basket
Operating instructions
9 place settings
Position 4 (Type III)
5 g + 20 g (Typ B)
Arrangement
lower basket
29