Select and start a washing programme
Interrupt or cancel a washing programme in progress ONLY if it's absolutely
Attention! Hot steam may escape when the door is opened. Open the door
Cancel a delay start or a washing programme in progress
1. Press RESET button.
2. The message CONFIRM CANCEL ? is displayed.
3. Press OK / START button to confirm.
4. The appliance returns to setting mode and the message CHOOSE PRO-
GRAMME is displayed.
• If a delay start is cancelled, also set the washing programme has been cancelled.
• If a new washing programme is set, check that there is detergent in the detergent
Interrupt a washing programme in progress
• Open the dishwasher door; the programme will stop. The message PLEASE
CLOSE DOOR is displayed.
• Close the dishwasher door; the programme will continue from the point at which
it was interrupted.
End of the washing programme
• The dishwasher will automatically stop and an acoustic signal informs you of
the end of the washing programme.
• The messages PROGRAMME END alternated with PLEASE SWITCH OFF are
1. Press the ON/OFF button.
2. Open the dishwasher door.
Leave the door ajar and wait a few minutes before removing the dishes; in this
way they will be cooler and the drying will be improved