Adding New Handsets; Charging Spare Batteries - AT&T E2555 User Manual

Appendix

Adding new handsets

Your telephone can accommodate up to eight cordless handsets . You can add new
handsets (Model E250, sold separately) at any time, but each must be registered with the
base before use.
Before using a new handset, you must register it with the
Enter base ID, then press OK
base. During registration, you must enter the 15-digit ID
ENTER BASE ID
number of the telephone base. To find this number, go to
123456789012345
the base, press
<
OK BASE ID
Follow the instructions provided with your new handset
to register it for use with your telephone.
The handset provided with your telephone is automatically
registered as Handset 1. Additional handsets will be
assigned numbers in the order they are registered (2, 3, 4,
HANDSET 2
etc.) up to a maximum of eight .
REDIAL MENU MEM
Handset 1
, scroll down to select
MENU
, then press .
OK
Handset 2 Handset 3
36
Appendix

Charging spare batteries

Optional spare batteries (sold separately) can be kept charged in the base, for quick
replacement when handset batteries become depleted. For best results, use AT&T
2AA rechargeable batteries (sku 26820).
In the event of a power failure, the charged batteries in the base will allow you to
make and receive calls from the cordless handset for up to 2.5 hours.
Spare batteries require at least 24 hours to reach full charge.
DISPLAY
Slide latch left to open battery drawer
37
Insert spare batteries,
then close drawer
Caution: Use only AT&T 2AA
NiCad or NiMH rechargeable
batteries. Do not use AA
alkaline batteries.