Appendix; Adding And Registering Handsets - AT&T EL52103 User Manual

Appendix

Adding and registering handsets

Your telephone system can support up to five handsets. The handsets
provided within your product package are already registered as HAnDSET 1,
and so forth. You can purchase additional handset AT&T El50003 or AT&T
El50013 to expand your telephone system. El50003 (silver) is for use with
El52103/El52203/El52253/El52303/El52353/El52403/El52503.
El50013 (champagne) is for use with El52113/El52213/El52313/
El52333. Additional handsets are assigned numbers in the sequential order
they are registered (up to HAnDSET 5). Each handset must be registered to
the telephone base before use.
Register a handset to the telephone base
1. Before you begin registration, make
sure the handset is out of the
telephone base or charger and shows
To register HS... and ...see manual,
alternately.
2. Put the handset you wish to register
on the telephone base cradle.
3. The In USE light on the telephone
base turns on. After about 10
seconds, the handset shows
Registering... The handset shows
Registered and you hear a
confirmation tone if the registration was successful. The In USE light turns
off. The handset is now registered with the telephone base.
If the registration fails, the handset displays Failed and then To register HS...
and ...see manual, alternately. Try the registration again by removing the
handset from the telephone base and then placing it back in.
notes:
• You cannot register a handset if any other system handset is in use.
• You can only register one handset to the telephone base at a time.
TONE
For registration, put the handset on the
telephone base, not the handset charger.
67
TONE