Table of Contents
Advertisement
Headlamp High/Low-Beam Changer
First, you must have the headlamps on. For high beams,
push the turn signal lever toward the instrument panel.
To switch back to low beams, pull the lever toward you.
Flash-to-Pass
-
With the lever in the low
toward you to momentarily switch to high beam (to
signal that you are going to pass). When you release the
lever, the headlamps will return to low
2-36
When the high beams are
on, a light on the instrument
panel cluster also will be on.
It will go off when you
switch to low beam.
beam position, pull the lever
-
beam operation.
Windshield Wipers
The lever on the right side of the steering column
controls the windshield wipers and washers.
You control the windshield wipers by moving the stalk
up or down.
For steady wiping at low speed, move the stalk down
to LO. For higher speed wiping, move the stalk down
further to HI. To stop the wiper, move the stalk to OFF.
Advertisement
Table of Contents
