Electrical Connection - AEG T30 User Information

125987091.qxp 2007-03-23
Installation

Electrical connection

This machine is designed to operate on a 220 V, single-phase, 60 Hz supply.
Check that your domestic electrical installation can take the maximum load
required (2.2 kW), also taking into account any other appliances in use.
WARNING: THIS APPLIANCE MUST BE EARTHED.
The manufacturer declines any liability should this safety
measure not be observed
The appliance is supplied with a 13amp plug fitted.
In the event of having to change the fuse in the plug supplied, a 13amp ASTA
approved (BS1363A) fuse must be used.
Should the plug need to be replaced for any reason, proceed as described
below.
The wires in the mains lead are coloured in accordance with the following
code:
Green and Yellow
Blue
Brown
The wire coloured green and yellow must be connected to the terminal
marked with the letter «E» or by the earth symbol
yellow.
The wire coloured blue must be connected to the terminal «N» or coloured
black.
The wire coloured brown must be connected to the terminal marked «L» or
coloured red.
Upon completion there must be no cut, or stray strands of wire present and
the cord clamp must be secure over the outer sheath
WARNING:
A cut off plug inserted into a 13 amp socket is a serious
safety (shock) hazard.Ensure that the cut off plug is dis-
posed of safely.
12
14:47 Page 12
- Earth
- Neutral
- Live
or coloured green and