Table of Contents
Advertisement
A
• The six retaining brackets are inserted in the outer lip on the hob
frame, A, in the positions marked (two on the left and right sides, one
at the front and one at the back). The plastic clip on the bracket must
engage firmly in the rectangular cut-out provided. The brackets must
not be inserted in the cut-outs in the middle of the lip on the protec-
tive casing X!
• On tiled work surfaces, the joints in the area where the hob sits must
be completely filled with grout.
• Ensure that the seal is correctly seated in the frame and that it is
seated against the work surface without leaving any gaps. Please do
not apply any additional sealant, this will make removal more diffi-
cult in the event of the need for service.
600
X
Installation Instructions
73
Advertisement
Table of Contents
