Table of Contents
Advertisement
GB
AR
Ignition plug
Automatic burner ignition is provided (when installed) by a ceramic "plug" and a metal
electrode (B in fig. 1).Periodically clean these parts of the hob thoroughly.In addition,
to avoid ignition difficulties, check that the cavities in the
burner are not obstructed.
To remove deposits from the burner cavities, remove the
cap and separate the two parts (see diagram on the
right).After cleaning, put the two parts back together and
return them correctly to their position.After washing, replace
the hob pan stands, checking that they are correctly
positioned.
Service and parts
Before leaving the factory, this appliance was tested and adjusted by specialist skilled
staff to give the best operating results.Any subsequent necessary repairs or adjustments
must be carried out with the greatest care and attention.
For this reason, we strongly advise you always to contact the Dealer who sold you
the appliance or our nearest Service Centre, specifying the nature of the problem, the
model of the equipment (Mod.), the product number (Prod. No.) and the serial number
(Ser. No.).These data are provided in the plate on the cover of this manual.Always
request the use of original spare parts.
Warranty conditions
Your new appliance is covered by a warranty.The warranty conditions are provided
in full in the "Warranty conditions - Service centres" leaflet which you will find inside
the appliance.
Keep the fiscal receipt or delivery note, either of which documents your purchase of
the appliance and provides proof of date of purchase, in a safe place together with
the leaflet.
If the After-Sales Service is called in, show these documents to the staff.If this procedure
is not followed, the Service Centre will have no option but to charge for any repairs.
If necessary, you may find your nearest Centre by consulting the "Warranty conditions
- Service centres" .
10
10
Advertisement
Table of Contents
