Unpacking And Checking Contents; Tools Needed; Unpacking; List Of Loose Parts - RIDGID MS 1290 Owner's Manual

Unpacking and Checking Contents

Tools Needed

Hex "L" Wrench
1/4" (supplied)
19 mm Socket
Combination
Wrench (2) 12mm

Unpacking

WARNING: To reduce the risk of
injury from unexpected starting
or electrical shock, do not plug
the power cord into a power
source outlet during unpacking
and assembly. This cord must
remain unplugged whenever you
are working on the saw.
This Miter Saw is shipped complete in
one box.
WARNING: Although compact,
this saw is heavy. To reduce the
risk of back injury, get help when-
ever you have to lift the saw.

List of Loose Parts

NOTE: Before beginning assembly, check
that all parts are included. If you are miss-
ing any part, do not assemble the saw. E-
mail us at info@ridgidwoodworking.com if
any parts are damaged or missing.
Sometimes small parts can get lost in
packaging material. Do not throw away
any packaging until saw is put together.
Check packaging for missing parts before
contacting RIDGID. A complete parts list
A
Hex "L" Wrench
4mm, 5mm, 6mm
Combination Square
B
Combination Square Must be True
Draw Light
Line on Board
Along this Edge
Should be no Gap or Overlap when Square
is Flipped Over in Dotted Position
1. Before removing the miter saw from the
carton tighten the slide lock knob to
guard against sudden movement.
2. Remove the miter saw from the carton by
lifting the saw with the carrying handle.
3. Place the saw on a secure, stationary
work surface and look the saw over
carefully.
WARNING: If any part is missing
or damaged, do not plug the saw
in until the missing or damaged
part is correctly replaced. To
avoid electric shock, use only
identical replacement parts when
servicing double insulated tools.
(Repair Parts) is at the end of the manual.
Use the list to identify the number of the
missing part.
The following parts are included:
Part or Assembly
A Basic Saw Assembly .......................... 1
B Workpiece Clamp ............................... 1
C Dust Bag ............................................. 1
D Dust Bag Frame.................................. 1
E Owners Manual................................... 1
C
D
11
Straight Edge of
Board 3/4" Thick
This Edge Must
be Perfectly
Straight
Qty.
E