Charmglow 720 Use And Care Manual page 8

Step 3: Assemble the back panel to the two side panels. with two (2)pcs 1/4*12mm screws and four (4) pcs 5/32*12 as
shown figure below.
Step 4: Assemble the front cart flame and back cart flame to the front side and back side of the side panel with eight (8)
screws . Attention: The front cart flame should be screwed from outside into inside with four(4) pcs 1/4*42
screws, and the back cart flame should be screwed from inside into outside with four(4) pcs 1/4*12 screws.
6