Brinkmann Elite Owner's Manual page 31

REPLACING THE LED BATTERY
IN THE SEAR BURNER CONTROL KNOB
Step 1
Loosen screw to battery
tab using a screwdriver.
Step 3
Remove the old battery
pack from the sear
burner control knob.
Step 5
Reposition the
battery tab back to
its original position.
A replacement battery pack may be purchased at Brinkmann Customer Service by calling 800-527-0717
or by visiting our website at
NOTE: The battery pack can be replaced by using three (3) AG13 or LR44 battery cells.
Step 2
Battery Tab
Step 4
Step 6
Secure the battery tab using a screwdriver.
Tighten securely. To test if working properly,
press the switch with fingertip.
Rotate the battery tab
to gain access to the
battery pack.
-
+
Replace with a new
battery pack.
Switch
30