Start Time Pre-Selection - Electrolux EDC 5370 Operating Instructions Manual

2. If required, select the button SPECIAL CARE
(SCHON), AUDIBLE SIGNAL (SIGNAL) or QUICK
DRY (KURZ).
• SPECIAL CARE (SCHON) button
This program operates with reduced heat. Press
the SPECIAL CARE (SCHON) button for fabrics
bearing the care symbol S. Gentle drying is
advisable for heat-sensitive fabrics (such as
acrylic and viscose). The SPECIAL CARE
(SCHON) button has no effect if the QUICK DRY
(KURZ) button has already been pressed.
• AUDIBLE SIGNAL (SIGNAL) button
During the crease-protection phase (immediately
after the drying process), an acoustic signal is
sounded at certain intervals (see "End of drying
process").
• QUICK DRY (KURZ) button
The selected programme runs on a shortened
programme to produce the same degree of drying.
The QUICK DRY (KURZ) button cannot be used
with COTTONS DAMP (BAUMWOLLE LEICHT-
TROCKEN), HAND IRON (BÜGELTROCKEN)
and MACHINE IRON (MANGELTROCKEN) pro-
grammes or with the
(MISCHGEWEBE
gramme. The QUICK DRY (KURZ) button has no
effect if the SPECIAL CARE (SCHON) button has
already been pressed.

Start time pre-selection

Using the delay start timer you can delay the start of
the drying programme by 3, 6 or 9 hours.
1. Setting the program.
2. Hold the DELAY TIMER (ZEITVORWAHL) button
depressed
until the desired number of hours of delay of the
program start appears in the display panel.
3. Press the START/PAUSE (START/PAUSE) but-
ton.
After elapse of the set number of hours the dryer
automatically starts the set drying program. The
number of hours until the set drying programme is
due to begin is shown in the display panel.
You can correct the pre-selected start delay time
at any time.
DELICATES DAMP
LEICHTTROCKEN) pro-
13