Servicing - Electrolux EDC 505 E Installation And Instruction Manual

Before contacting your local Service Centre, please make the following checks:
PROBLEM
The dryer does not start up
The dryer does not dry properly
If, after the above checks, there is still a fault, call
your local Service Centre.
Please make sure you give the model and serial
number of the appliance.
This information can be found on the rating plate.

SERVICING

POSSIBLE CAUSE
The door is open.
There is a power failure.
The fuse is damaged.
The start button has not been depressed.
The drying programme or time has not been
selected.
The water container is full or is not properly
positioned.
The filter or the condenser is clogged.
An insufficient drying time has been selected.
The selected programme is not suitable for
the laundry.
The water container is full or is not properly
positioned.
Excessive laundry load.
61