5. Position left hand leg assembly as shown with console mounting tab facing up.
Place non-tank side of bottom pan over bottom support. Attach bottom pan with
1/4"-20 x 3/4" carriage bolt and tapered wing nut.
6. Position right hand leg assembly as shown, with console mounting tab facing up.
Place tank side of bottom pan over bottom support. Attach bottom pan with
1/4-20 x 3/4" carriage bolt and tapered wing nut.
1/4"-20 Tapered Wingnut
1/4" - 20 X 3/4" Carriage Bolt
Console mounting tab facing up.
Tank opening on right side.
8
Bottom Pan
Bottom Support
Console mounting tab facing up.