Quick Guide To System Functions - First Alert FA145C User Manual

QUICK GUIDE TO SYSTEM FUNCTIONS

FUNCTION PROCEDURE
Check Zones Press READY key.
Arm System Enter code. Press arming key desired:
(AWAY, STAY, INSTANT, MAXIMUM)
Quick Arm Press #. Press arming key desired:
(if programmed) (AWAY, STAY, INSTANT, MAXIMUM)
Bypass Zone(s) Enter code. Press BYPASS key.
Enter zone number(s) to be bypassed
(use 2-digit entries).
Quick Bypass Enter code. Press BYPASS key.
(if programmed)
Silence Sounders
Enter code. Press OFF key.
Burglary:
Press OFF key.
Fire:
Press any key.
"Check":
Disarm System Enter code. Press OFF key.
Clear Alarm Memory After disarming, enter code again.
Press OFF key again.
Duress (if active) Arm or disarm "normally", but
use your 4-digit Duress code to do so.
Panic Alarms Press key [A], [B], or [C] for at least 2 sec., or
(as programmed) (if no A, B, or C on your keypad),
press keys [1] & [ ], or [ ] & [#], or [3] & [#],
both at same time.
Chime Mode To turn ON or OFF: Enter code. Press CHIME key.
Test Mode To turn ON: Enter code. Press TEST key.
To turn OFF: Enter code. Press OFF key.
Consult Phone Access User's Guide that
Phone Access
(Phone Module) accompanies Phone Module.
if applicable
Service Request Press key "D" (if present,) for 2 secs, or press
[ ] & [#] keys simultaneously. (See page 23.)
COMMENTS
To view faulted zones when system not ready.
Arms system in mode selected.
Arms system in mode selected, quickly and without use of code.
Bypassed zones are unprotected and will not cause an alarm if
violated.
Bypasses all faulted zones au tomatically.
Also disarms system. Memory of alarm remains until cleared.
Memory of Alarm remains until cleared.
Determine cause. See Page 26.
Also silences sounders. Memory of alarm remains until cleared.
Keypad will beep rapidly upon entry if alarm has occurred.
Alarm display will remain upon disarming until cleared.
Performs desired action and sends silent alarm to central station.
See Page 23 for panic functions programmed for your system.
Keypad will sound if doors or windows are violated while system is
disarmed and chime mode is ON.
Tests alarm sounder and allows sensors to be tested.
Permits system access remotely, via Touch-tone phone
(see pages 4, 11).
Sends a "Request for Service" message to the central station (if
connected). See page 23 to see if [ ] & [#] keys provide this feature.
– 33 –