Table of Contents
Advertisement
Setting up your
Ultimate 106 system
Before you use your Ultimate 106, you must
select some basic settings in order to choose the
way you want your phone system to work.
There are 2 types of settings which you can
adjust: System settings and Extension settings.
When changing System settings switch to
Program mode, when changing Extension
settings switch to Normal mode (see program
switch on "At a glance" page 1).
All settings must be carried out using the
master phone on extension 11.
System settings
System settings affect all extensions connected to
your Ultimate 106. To change Systems Settings,
the Programme switch must be set to
• Time and Date.
• Day and Night Ringing.
• Call Barring.
• Hotline.
• Fax Extension.
• Direct Line Extension.
• System Reset.
• Music.
• Extension Ring Delay.
IMPORTANT
When in program mode, the extensions 11-16
are identified as the following:
extn 11 = 1, 12 = 2, 13 = 3 etc.
To make any system settings
COVER
Set the programme switch to
Remember to switch off the programme switch
when you have finished changing system settings,
otherwise you will not be able to receive or
.
PROGRAM
make any calls when in Program mode. Callers
will still hear the usual ringing tone.
When in program mode, a different kind of dial
tone is heard and the "In Use" light comes on.
Remove the lower cover.
Power
In Use
Day/Night
Messages
DISA/Ans
EXT 11 EXT 12 EXT 13 EXT 14 EXT 15 EXT 16
PROGRAM
PLEASE NOTE
PROGRAM
SWITCH
Ultimate 106
1X6 PABX WITH VOICE MAIL & CALLER ID
.
9
Advertisement
Table of Contents
